Page 54 - Clayton's Supply Catalog 12.01.2020

Tri-Boro Steel Shelving All Tri-Boro steel components receive a rust resistant Tri-Boro Starter and Add-On Shelving Configurations

Steel Shelving sizes available in the industry. When used in combination phosphatized cleaning for better paint adhesion and Steel Shelving 7 SHELVES Add On Unit No. OS OPEN TYPE STARTER UNIT
Tri-Boro Shelving is manufactured in the widest range of

durability. A custom, quality blended powder coat paint is
this array of sizes can meet the most demanding of custom
36" WIDE x 7’ 1” HIGH
applied “Electro-Statically” and then baked on in a continuous
applications.
Depth Starter Unit No.
The flanged shelf is manufactured from cold rolled steel
curing oven for lasting durability and outstanding appearance.
Each OS unit is complete consisting of:
This process is the latest innovation for the integrity of paint
and has “Triple Bends” on all four sides for incomparable
12"
OSB 85-1536-7
OAB 85-1536-7
15"
surface and the protection of our environment.
strength.
• Any number of shelves
OAB 85-1836-7
18" OSB 85-1236-7 OAB 85-1236-7 • Open Type - Starter Unit
OSB 85-1836-7
STANDARD FINISHES 24" OSB 85-2436-7 OAB 85-2436-7 • Four uprights
Standard shelves are manufactured in 24", 30", 36", 42" Tri-Boro’s standard finish is Gray. However, all colors shown 30" OSB 85-3036-7 OAB 85-3036-7 • Two pair of side sway braces
and 48" widths, and 9", 12", 15", 18", 24", 30" are available for a small additional charge. The choice of an • One pair of back sway braces
and 36" depths. alternate color may create a slight delay in delivery. • Necessary nuts and bolts or clips
Unit Type OA OPEN TYPE ADD-ON UNIT
Gray (standard) Blue Red Sky White Putty Mist Gray Black Pearl White Sand B=Boxer
K=Klip-It Each OA unit is complete consisting of:
T=Thunderbolt • Open Type - Add On Unit
SHELF TYPES POST TYPES Cross Braces Unit Height • Any number of shelves
• Four uprights
Unit Depth
Flange Shelf Tri-Boro manufactures rigid roll on both Unit Width • One pair of back sway braces
sides indicates
formed “Box” and companion starter • One pair of side sway braces
“Offset Angle” type posts. Number of Shelves • Necessary nuts and bolts or clips
The box post provides unobstructed
shelf access. One box post takes the
place of two angle posts at the Box Post Holes 1-1/2” O.C.
front of a shelving unit.
The offset angle post reduces shelf
Class 0 – No Re-Bar Class 1 – 1 Re-Bar Class 2 – 2 Re-Bar accessibility by 1 inch per end,
although the field length is nominal to
Flange Shelvesare available in both 20 GA. and 18 GA. the dimension ordered.

material thickness. Class 0 is designed for applications that
do not require extreme load bearing strength. Box style post heights range from
The addition of 1 Re-Bar will increase bearing strength by 3'1" to 11'3". Offset Angle heights Offset Angle Post 7 SHELVES
about 50%. The addition of 2 Re-Bars will increase the range from 3'1" to 12'3". Holes 1-1/2” O.C. 36" WIDE x 7’ 1” HIGH CS CLOSED TYPE STARTER UNIT
bearing strength by over 100%. Please see the chart on Both styles are manufactured in 1 foot Depth Starter Unit No. Add On Unit No.
page 7 for exact load bearing strengths. increments. All posts are 14 gauge 12" CSB 85-1236-7 CAB 85-1236-7
steel. Shelves can be either clipped 15" CSB 85-1536-7 CAB 85-1536-7 Each CS unit is complete consisting of:
Boxer Shelf or nut & bolted to the post. 18" CSB 85-1836-7 CAB 85-1836-7 • Closed Type - Starter Unit
24"
CSB 85-2436-7
CAB 85-2436-7
• Any number of shelves
Boxer Shelves are constructed of 22, 20 or 18 gauge steel 30" CSB 85-3036-7 CAB 85-3036-7 • Four uprights
with full welded box formation in front and back of the shelf • Two closed sides
and have formed channels on both ends. All corners are Heavy Duty Box Style and Rolled Formed Angle Post • One closed back
lapped and welded for additional strength. Heavy Duty Offset Posts Holes 1” O.C. • One base
The box formation is welded on a 6" center minimum to Heights range from 7'3" to 28'. • Necessary nuts and bolts or clips
provide integrity the entire length of the box. All shelves have Both styles are manufactured in
a box profile height of 1-1/4". All box shelves accommodate 1 foot increments. All posts are
either clip or nut and bolt connection to the upright. standard 13 gauge (Also available in
Please see the chart on page 7 for exact load bearing 12 gauge). Shelves can be either CA CLOSED TYPE ADD-ON UNIT

strengths. clipped or nut and bolted to the post.
Government Post
Holes 1” O.C. Sides on both Each CA unit is complete consisting of:
ends indicates • Closed Type - Add On Unit
starter • Any number of shelves
• Four uprights
• One closed side
• One closed back
• One base
• Necessary nuts and bolts or clips
Tri-Boro’s “Boxer” TM industrial grade steel shelving features a Heavy Duty Box Post Heavy Duty Offset Post Offset Angle Post
welded tubular box design with lapped and welded seam corners. Holes 1” O.C.

52